What Length Shoelaces Do You Need? Eyelet & Model Guide
Retour au journal
Guide19 novembre 2026· 10 min de lecture

What Length Shoelaces Do You Need? Eyelet & Model Guide

Eyelet to cm chart, exact lengths by model (AF1, Dunk, Converse, Stan Smith…) and the no-guess measuring method. Find the right shoelace length in 2 minutes.

M

MonLacets

Rédacteur

The length of your shoelaces depends first on the number of eyelet pairs on your shoe: count around 60 cm for 2 to 3 eyelets, 110 to 120 cm for 6 to 7 and up to 180 cm for boots with 10 eyelets or more. Keep this rule in mind, find your case in the table below, and you will have the right size in two minutes.

This guide gives you the full eyelet → centimetre chart, the exact lengths for the most-worn models (Air Force 1, Dunk, Stan Smith, Converse, boots), the no-error measuring method, and the 4 details that shift the ideal size.

What length shoelaces for how many eyelets?

The eyelet count is the golden rule — shoe size itself barely matters. Count the pairs of eyelets (one eyelet on the left + one on the right = 1 pair) and read the matching row:

Eyelet pairsTypical shoesRecommended length
2–3Derbies, low oxfords, slim dress shoes45–60 cm
4Dress, standard oxfords60–75 cm
5Low-top sneakers, sport casual75–90 cm
6Standard sneakers, low-tops90–120 cm
7High-tops, Stan Smith, low AF1110–120 cm
8High-tops, high Converse, Blazer120–150 cm
10 and +Boots, hiking shoes150–180 cm
Wide or widely spaced eyelets—+10 to 15 cm on the matching row

Sources: consensus of the charts published by reference guides (monsieurchaussure, meslacets, senkels, madebybobine, nike.com), checked in November 2026. These are ranges: two 6-eyelet shoes may need 90 or 120 cm depending on their spacing.

How to count your eyelets without getting it wrong

Diagram: how to count the eyelet pairs on a shoe to choose the right shoelace length

The classic trap: counting the holes on one side only. On a shoe, each horizontal row counts as 1 pair. Look at the shoe from the front: one row of holes on the left + one on the right = 1 eyelet. If you count 6 holes on one side, you have 6 pairs of eyelets — and the row for "6" in the table.

Why a range rather than one exact number?

Two pairs with 7 eyelets can need different lengths: the spacing between eyelets, the lacing type (criss-cross or straight) and the size of the final bow change the amount of lace required. The range in the table covers most cases; fine-tune with the factors in chapter 4.

Got your number? → Find the exact lace in the shop

Measuring without mistakes: the 2 reliable methods

Method 1 — Measure the original lace

Measuring a lace flat, aglet to aglet, with a ruler to find its length in cm

This is the safest if your old lace fit you well. Take it right off, lay it flat on a surface, pull it nice and straight, and measure it aglet to aglet (including the plastic tips). The result in centimetres is the length to order: no more, no less.

Method 2 — Count the eyelets when the lace is missing or was the wrong size

If you have no reliable reference (lace lost, too short or too long from the factory), fall back on the chapter 1 table: count your eyelet pairs, pick the range, then fine-tune according to the eyelet spacing and your lacing style.

The string trick, when you are torn between two sizes

Thread a simple piece of string through your eyelets exactly the way you would lace your shoes — criss-cross or straight, tight or loose. Tie it, cut off the excess, then measure the string you used: add 5 to 10 cm for a comfortable bow. It is the field-tested method recommended by professional guides.

What length shoelaces for each shoe model?

The table below lists the observed lengths for the most-requested models (data from Nike guides and comparison charts, checked in November 2026):

ModelEyelet pairsRecommended length
Nike Air Force 17–8~140 cm
Nike Dunk Low7–8~137 cm
Nike Air Max 907~140 cm
Nike Blazer (high)8+150–160 cm
Air Jordan 1 High9160–180 cm
Converse Chuck Taylor high8137–140 cm
Converse Chuck Taylor low6–7110–120 cm
Adidas Stan Smith7114–120 cm
Timberland-style boots5–7 wide eyelets150–180 cm
Kids shoe4–570–90 cm

These values line up with the eyelet → cm table: a 7-eyelet Stan Smith lands neatly in the 110–120 cm range, an 8-eyelet high Converse takes its 137–140 cm. If your model is not listed, go back to the chapter 1 table with your number of eyelet pairs.

Sneakers and trainers

Most low-top sneakers (Stan Smith, city sneakers, standard sport shoes) manage with 110 to 120 cm. High-tops like the Blazer, Jordan or high Converse move up to 140–160 cm. For the Air Force 1, the canonical length is 140 cm; it is also the starting point for a styled lace-up — if that interests you, read our 5 original ways to lace your Air Force 1. On the material side, flat laces for sneakers cover most sneakers; for a rawer look, the rope lace AF1 style is the reference.

Dress and smart city shoes

Derbies, oxfords, slim ankle boots: 2 to 4 closely spaced eyelet pairs generally need 45 to 75 cm. Here the length is short but the lace profile matters just as much: go for a fine round waxed lace — its discreet diameter and glossy finish respect the dress-shoe code, where a flat lace that is too wide would clash.

Boots and high shoes

Boot eyelets are wide, metal and often widely spaced: apply the "wide eyelets" row of the table, i.e. +10 to 15 cm more than a standard sneaker with the same eyelet count. Budget 150 to 180 cm for a hiking boot or a hook-style Timberland. Choose thick round laces for boots and high-tops: their diameter resists the abrasion from hooks and metal eyelets.

Sport sneakers

Running and training: 6 to 7 eyelets need 110 to 120 cm, with a firmer hold than a casual sneaker. Sports laces with an anti-slip texture keep the bow from coming undone mid-run — a detail that does not change the length, but changes everything in use.

Kids shoes

Kids pairs with 4–5 eyelets sit around 70 to 90 cm. The real criterion here is the lacing: for kids who cannot tie a bow yet, a short elastic lace skips the knot — flat elastic laces turn any sneaker into a slip-on.

The 4 factors that change the ideal length

The eyelet → cm table covers 90% of cases. These 4 variables explain the rest:

1. Eyelet width and spacing

Two shoes with 6 eyelets do not have the same lacing "perimeter": a wide sneaker with very widely spaced eyelets uses 5 to 10 cm more than a narrow city shoe. With metal eyelets or boot hooks, add a flat 10 to 15 cm.

2. The lacing type

Criss-cross lacing (the standard) uses the most lace. Straight lacing ("bar lacing" or "straight lacing") uses less; techniques that skip eyelets even less. If you switch from criss-cross to a more economical pattern, the same lace will suddenly seem too long.

3. Lace thickness and material

A thick lace (thick round, twisted rope) takes a slightly longer path through the eyelets than the thin flat lace used as the reference in the tables — count 2 to 5 cm more. Slippery materials (nylon, waxed polyester) do not lengthen the lace but make the bow less grippy: plan for a double bow.

4. Lace too long or too short: what to do?

Too long: as a quick fix, a double bow or tucking the ends into the shoe collar is enough. But if more than 15 cm drag on the floor, the simplest move is to drop a size (140 → 120 cm) — a lace rubbing the ground wears out, gets dirty and eventually unthreads. Too short: never force a bow "just barely" that pops open with every step; go up a size. Simple rule: between two sizes, choose the longer one for high-tops or criss-cross lacing, the shorter one for city shoes or low-tops.

Choosing the right length on MonLacets

With your measurement in hand, simply select the closest length among the catalogue's standard sizes. Three habits:

  • Between two sizes? Longer for high-tops and criss-cross lacing; shorter for city and low-tops.
  • Thick lace or rope? Take the top end of your range.
  • Doubt about the profile? Product pages list the width in mm: compare it with your current lace or the opening of your eyelets.

👉 See all laces by type — flat, round, rope, sports

The plastic tips (aglets) can be replaced too: if only your ends are frayed, replacement aglets in accessories save you replacing the whole lace. And for care, our guide to clean white laces makes the difference between a dull lace and one that looks "new".

In short

Keep the eyelet rule: count the pairs, read the table, and adjust by +10 to 15 cm if your eyelets are wide or your lacing is greedy. Got your number? All that is left is choosing the colour and the profile — see every length available on MonLacets. And once you have the right size in hand, discover how to lace your Air Force 1 in style.

FAQ — Your questions on shoelace length

What length of shoelaces for 6 eyelets?

Count 110 to 120 cm: it is the standard format for low-top sneakers and classic sneakers with 6 eyelet pairs. If your eyelets are very widely spaced or you lace in a tight criss-cross, take the top end (120 cm); closely spaced eyelets get by with 110 cm.

What length of shoelaces for 7 eyelets?

Between 110 and 140 cm depending on the spacing: a 7-eyelet Stan Smith takes 114–120 cm, a 7–8 eyelet Air Force 1 needs ~140 cm. The higher and wider the shoe, the higher you go in the range.

How to measure a lace without the original one?

Two options: count your eyelet pairs and read the table above; or thread a string through the eyelets like a real lacing, tie it, measure it and add 5 to 10 cm for the bow.

What length of shoelaces for Air Force 1s?

The reference length is 140 cm for the standard AF1 with 7–8 eyelet pairs — that is the size of the model's original laces. For an AF1 Mid or High, move up to 150–160 cm; for a kids version, 110–120 cm is enough.

Shoelaces too long, what to do?

As a quick fix: a double bow, or tuck the ends into the shoe collar. If more than 15 cm drag, drop a size (140 → 120 cm). A lace sweeping the floor wears out fast, gets dirty and comes undone more often.

Does eyelet width change the length?

Yes: wide, metal or spaced eyelets (boots, hiking) use 10 to 15 cm more than the standard table. A boot with 6 widely spaced eyelets may need as much as a high-top with 8 closely spaced eyelets.

What length of shoelaces for a high Converse?

137 to 140 cm for the high Chuck Taylor with 8 eyelet pairs. The low version (6–7 eyelets) gets by with 110 to 120 cm. For a lacing that skips eyelets, drop by about ten centimetres.

#lacets#longueur#guide#oeillets#pointure

À lire aussi